Monday, October 31, 2011

Make a Cool Simple Stocking Stuffer with Kids; Foam Rubber-band Dart -- Handmade Holiday 2011

Good Morning!

For this week's Handmade Holiday, we're going to be making foam darts (or bullets as the kids like to call them) with (or for) kids! This is a design that Theresa and I invented last Christmas when we needed to make a really quick, but cool, toy to stick in all 11 of the stockings, just days before Christmas. With lots of trial and error, we developed this design and quickly drove the siblings nuts when they overheard us having a blast in our room, jumping off the beds, as we tested these out, shooting them at each other! :o) 
 
"Just wait till Christmas!" we answered the whines coming from the other side of the bedroom door, before going back into attack mode on the sister across the room.
 
As you can imagine, it was a pretty rowdy Christmas morn when everybody discovered their own colorful weapon in the bottom of their handmade stocking. Lots of games were quickly invented and lots of rubber bands broken by the next day. You could usually find one or more bullets stuck in the Christmas tree at any given time, if the need to defend yourself suddenly arose!
 
 
So here we go. These are our own family invented 'Foam Bullets' or 'Indoor Darts'. 

Photobucket


The supplies are pretty simple to come by... You'll need:
-One package of colored craft foam (ours is left over from last year).
-A hot glue gun (make sure you have lots of extra glue sticks on hand. These use a lot!)
-A pocket knife that includes; a knife, flat head screwdriver, and a pliers (if you don't have a pocket knife, simply collect those tools individually). 
-Rubber bands (the newer the better, if they're worn or dry they'll break quickly). 
-Scissors.
-A Pen.
Photobucket
(Try not to be too distracted by the mirror on the desk... We only have one of everything! :)

We used two colors of foam for each bullet. Have the kids pick their two colors.
Photobucket

Fold the main color (what will be the base) in half lengthwise and cut on the fold. (The other half can be used for another bullet base.)
Photobucket

Lay the pen on the cut edge (it should be the longer of the two edges).
Photobucket

And tightly roll up the pen in the foam. This can be difficult to get tight, so you may to help the child out here.
Photobucket

Stop rolling an inch from the end. Lay a thin strip of hot glue along the whole edge (closer to the fold will keep it from squirting out the edges).
Photobucket

Hold it shut for 30 seconds or until it holds.
Photobucket

You can have a little person pull out the pen. :)
Photobucket

Now, here we have our main color rolled into tubes and our second color ready to make the fins and tips. We also have a rubber band for each.
Photobucket

Now you're going to make a horizontal slit about a half inch from the top with your knife. Stick it down hard enough that it goes all the way through so you can see a little mark on the other side. Turn it over and make a second slit on that mark.
Photobucket

Cut your rubber band open. Using the flat head screw driver, force the ends of the rubber band through your slits. Try to push them in at an upwards angle.
Photobucket

You can use your pliers to pull the ends out if you need too. (Sorry about the blurry pictures. Over eager--too close, 8yr photographer here!)
Photobucket

Tie the rubber band ends together like you would tie off a balloon (wrap the ends around your finger to make a loop and then stick the ends through). This can be tricky as the rubber band is going to be stretching all over the place on you. This is the one step that I have to do for all of the kids. :)
Photobucket

Should look like this.
Photobucket

 Pull the knot down into the tube and cut off the tails so they don't stick up (like they are in the picture!).
Photobucket

Cover the knot (pretty much fill the top) with hot glue.
Photobucket

You don't want the glue to be sticking out though, as it could be rather painful. Hanging down inside there a ways is best.
Photobucket

Cut a thin strip from your second color of foam for the tip. (Note the sweet pea making faces at herself in the mirror! :)
Photobucket
 
Using hot glue, wrap the strip around the top of your the tube, covering the slits where the rubber band enters. Make sure your rubber band is pulled, just lightly forward (you don't want it to stretch), away from the tube.
Photobucket

Next, lay the tube on your foam and draw a rough fin shape. Cut it out and use it as a template to cut two more.
Photobucket

Doesn't need to be perfect. These things will fly with pretty much whatever shape fin the kids make for 'em.
Photobucket

 Glue your first fin on the seam of the tube (hold it straight up vertically, not like I'm doing here!).
 Photobucket

This is the easiest gluing job for the kids to do on their own. Still, they need a lot of supervision so they don't burn themselves or cover your desk in glue (yup, experience talking!).
Photobucket

Lay a strip of glue for your second fin and stick it on for 30 seconds (be careful to hold it still--don't tip it in any direction or let it slide up or down... this can be difficult for antsy little boys to do!).
Photobucket

You want the 3 fins spaced evenly around the tube, but don't get picky, just eyeball it.
Photobucket

There you go! Finished and very blurry! :-P
Photobucket
Now, you shoot these doohickeys as you would a normal rubber band: place your pointer finger in the rubber band and stick your other hand pointer finger inside the tube end, pinch with thumb, pull back, aim, and let go! (Wait for them to be completely dry before you try and shoot.)

When the glue is dry and no longer hot, you can let the real little ones at 'em with some markers or stickers to decorate.
Photobucket

When the kids realized they could make these on their own, there was no stopping 'em!
Photobucket

This is a very good interactive craft, as you need extra hands to help, but even youngsters are capable (as long as they don't burn themselves on the hot glue!).
Photobucket

The atmosphere in the room is very pleasant when everyone is working and helping each other out... Donna totally picked up on it and started getting really sweet toward her big brother! :)
Photobucket
 :)
 
So, what are you waiting for?? Invite a bunch of kids over, put on some Christmas music and start crafting foam darts! Then when everyone has one, let the games begin! You can play any game where tagging is required and replace it with dart shooting. The kids like to pick someone to be 'it' and have 'it' start in one room and try to get to another room without getting hit by someone hiding with a dart along the way! (Usually poor 'it' gets a few darts ;).

There you have it! Be creative, have fun, and happy handmade holidays! :)

Check over at Tonya's Plain and Joyful Living for the Handmade Holiday blog linkup every Mon.!


Photobucket

5 comments:

  1. That is so clever! I never would think of something like that, so simple to make and yet a whole load of fun for the family and little ones! I think I'll have to try making some "Bullets"!!!!

    ReplyDelete
  2. Wow ! Foam darts sounds different and fun! The making of it would create a mess around the place but the outcome would surely be a surprise.Will try this out ! You've got a highly creative mind !
    Check this -
    Am I Creative?
    Do you have the ability to generate new ideas, use imagination and make new decision?
    http://www.3smartcubes.com/pages/tests/creative/creative_instructions.asp

    ReplyDelete
  3. sweet!!!!!!!!!!!!!!!!!!!!!!!!!!

    ReplyDelete
  4. Just make sure nobody gets hurt playing with them

    ReplyDelete

Comments make us happy! :)